Parker offers a large selection of dryers, filters, lubricators, regulators and combination units. Full featured filters, regulators, filter/regulators and lubricators are available with a wide range of standard options to meet your air preparation needs. Dryers Parker point-of-use dryers deliver clean, dry air exactly where needed. They offer a compact, lightweight design, simple plug & play installation and virtually maintenance-free operation. Our clean air systems make it easy for companies to protect equipment, reduce downtime and maintenance costs and maximize compressed air solutions.
Parker offers a range of air preparation accessories for various applications, including ball and plug valves, check valves, safety blow guns, breather vents and a wide assortment of couplers, connectors, fittings, interchange nipples and flow control valves.
Air regulators provide quick response and accurate pressure regulation for the most demanding industrial air preparation applications. Parker offers a range of miniature, economy, compact, standard, hi-flow and pilot-operated regulators to meet a range of service needs.
Parker offers a wide range of liquid flow regulators for instrumentation, filtration, refrigeration and pneumatic applications and are used in process, power, oil, gas and semiconductor industries for precisely and quickly controlling the flow of liquids. Our precision built regulators are available in range of materials for fixed and differential pressure flows.
Two-unit and three-unit close nippled and modular filter regulator and lubricator (FRL) combination units provide attractive, versatile air preparation solutions. Parker offers a range of solutions including various pipe sizes, lightweight corrosion-resistant bodies, durable piston or diaphragm design regulators and fingertip lubricator adjustment.
Parker offers a range of air-line, pressure high flow and single phase regulators for instrumentation, filtration, refrigeration and pneumatic applications. Instrumentation regulators are used in the process, power, oil, gas and semiconductor industries to control the flow of liquids and gases with speed and precision. Air regulators provide quick response and accurate pressure regulation for the most demanding industrial air preparation applications, available as miniature, economy, compact, standard, hi-flow and pilot-operated regulators to meet a variety of service needs. The refrigeration line of pressure regulators includes valves that control inlet, outlet or differential pressure. Each regulator is available with an assortment of variations which enable one regulator to perform multiple functions. All regulators are built to the highest quality standards, recognized around the world for their performance, durability and reliability.
Air Lubricators provide lubrication for most general air preparation applications in a pneumatic system. Parker Air Lubricators provide optimum and uniform lubrication with fine micro-mist particles of 2 micron or smaller to pneumatic components, including those with complex piping arrangements.
The Balston regenerative dryer has safe, 12 VDC electrical controls. To install, simply attach the inlet (60 psig/4.1 BARG minimum) and outlet air lines, plug the electrical transformer into a wall outlet – no electrician required – and the unit is ready for trouble-free operation. This reliable dryer can be easily installed, operated, and maintained by personnel not trained in instrumentation. The Balston dryer is useful when air comes into contact with moisture-sensitive materials, or when outside compressed air lines are subjected to sub-freezing temperatures.
PCO2 CO2 Purifiers from Parker domnick hunter offer a comprehensive solution to preserve and guarantee the quality of gaseous carbon dioxide used in sparkling beverage bottling. Using multi-layer gas polishing technology, the PCO2 CO2 Purifiers includes Maxi PCO2 and Mplus PCO2 for plant scale protection. Operating as a vapor polisher to remove a wide range of potential carbon dioxide impurities, the system guarantees the gas quality so it remains within industry and company guidelines, preventing detrimental consequences to the finished end beverage, producers reputation and their bottom-line. PCO2 CO2 Purifiers are the beverage industry preferred choice and are installed in over 150 countries worldwide. Features & Benefits Comprehensive 5 stage polishing technology with optional 6th stage validated sterile gas filter Simple installation Compact design Low maintenance Low pressure drop Meets ISO9001:2000 standards Materials of construction independent verifications to comp ly with FDA Code of Federal Regulations title 21 CFR Carbon dioxide quality guaranteed Protection against impurities known to create beverage flavor defects Ensures carbon dioxide meets industry and company specifications and guidelines International sales and service support – purecareTM
Parker Hiross Antares dryers with Tandem Technology are an innovative family of compressed air dryers for volume flows from 150 to 2040 m³/h @ 7 bar g / PDP -40°C. Tandem Technology from Parker Hiross is a further development of the standard hybrid compressed air drying process. Compared to the conventional hybrid compressed air treatment process which is a simple lining-up of a refrigeration and an adsorption dryer, the Tandem Technology goes one step further and fully integrates the two classic drying principles in a compact compressed air treatment package. This unique combination enables high-quality compressed air to be provided to the end-user at low energy consumption levels when compared to more traditional adsorption dryers.
Parker Zander WVM compressed air dryers provide an energy efficient heat regenerated compressed air drying solution for large scale compressed air applications. Ideal for electronics and automotive production plants but suitable for all general manufacturing industries where typically high volume flows and low pressure dew points are required.
he meat and dairy industry demands the ultimate in cleanliness and sanitation in their food preparation areas. These areas are washed down nightly. Every square inch of equipment is sprayed with hot (140F), high pressure sanitizers. These sanitizers are caustic or acidic depending on the food. Much of the equipment is pneumatically operated but more and more this industry is moving to electronic controls that are housed in “water-tight” NEMA 4x cabinets. Electrical cabinets eventually develop leaks allowing moisture build up on electronic components. The moisture leads to premature component failure. Premature failure of components leads to emergency service and production down time.
PRD Series refrigeration air dryers Ideal for general purpose oil free pneumatic air treatment applications. They typically provide pressure dew points of 35°F (1.7°C) to 50°F (10°C) pressure dew point (pdp). Refrigeration air dryers work by cooling the air, so are limited to positive pressure dew point ratings to prevent freezing of the condensed liquid. Refrigeration dryers use a set of heat exchangers or a single heat exchanger (with chambers) first to pre-cool the air; second to refrigerate the air to condense out moisture vapor; and last to re-heat the air to prevent pipe sweating downstream particularly in humid conditions.
The DD15, DD30 and DD60 inline desiccant dryers should be used for intermittent and not continuous use applications. Always place a bulk separator, particulate and coalescing filter upstream of the desiccant dryer. Desiccant coated with oil will not absorb oil and will render it useless. A check valve should also be installed at the dryer inlet to maximize the life of the desiccant. (Note: that desiccant must be ordered separately.) These compact inline desiccant dryers are a convenient and cost effective means of ensuring your sensitive intermittent pneumatic applications are not exposed to damaging moisture. As wet air enters through the inlet, the air travels down through a bed of desiccant which absorbs the water vapor and aerosols. The silica gel desiccant beads will reduce the humidity down to a -40°F ( -40°C) pressure dew point. After the moisture has been removed, the dry air passes through a sintered bronze filter element (eliminating desiccant dust downstream), up the tube and out the outlet port. As the desiccant becomes saturated with moisture, the dew point will begin to rise. This is evident when the green silica gel desiccant beads in the onboard sight glass change to orange, indicating the need for desiccant replacement. Simply remove the flange and bowl and replace with new desiccant.
Parker’s 05E is a compact particulate filter/regulator that provides accurate pressure regulation and high moisture removal efficiency in a compact package. 05E is a one piece combined filter/regulator which minimizes space and piping by incorporating two units into one. The modular style of the 05E allows you to connect any combination of similar air preparation product by using connector brackets. A rolling diaphragm is used for extended industrial life and is excellent where a more stable air pressure is desired.
Parker’s 07E is a standard particulate filter/regulator that provides accurate pressure regulation and high moisture removal efficiency in a compact package. 07E is a one piece combined filter/regulator which minimizes space and piping by incorporating two units into one. The modular style of the 07E allows you to connect any combination of similar air preparation product by using connector brackets. A rolling diaphragm is used for extended industrial life and is excellent where a more stable air pressure is desired.
Parker’s 14E is a miniature particulate filter/regulator that provides accurate pressure regulation and high moisture removal efficiency in a compact package. 14E is a one piece combined filter/regulator which minimizes space and piping by incorporating two units into one. With an unbalanced poppet, solid control spring and a 5 micron element coming standard makes this filter/regulator an excellent choice where reliable pressure regulation and a high rate of particulate removal is needed. For specific flow and space restricted applications this product can provide a solution that does not sacrifice performance.
Parker’s P3NE is a high flow filter/regulator that provides accurate pressure regulation and high moisture removal efficiency in a compact package. P3NE is a one piece combined filter/regulator which minimizes space and piping by incorporating two units into one. The robust features of the P3NE such as the large filter element and solid control piston guarantees a low pressure drop and extended product life. The self relieving feature plus a balanced poppet provides quick response and accurate pressure regulation to help meet the needs of your air system requirements.
Parker’s P3YE is a particulate filter/regulator that provides accurate pressure regulation and high moisture removal efficiency in a compact package. P3YE is a one piece combined filter/regulator which minimizes space and piping by incorporating two units into one. The P3YE is designed to provide quick response and accurate pressure regulation for the most demanding hi-flow industrial applications. The rolling diaphragm was designed for long, trouble free operation and will not rupture or tear under high cycle or other demanding applications. The P3YE is also specially designed to efficiently filter out rust, dirt, moisture and other impurities from compressed air lines. Operation is fully automatic with a minimum of pressure drop.
Parker’s PB11/12 is a stainless steel particulate filter/regulator that provides accurate pressure regulation and high moisture removal efficiency in a compact package. PB11/12 is a one piece combined filter/regulator which minimizes space and piping by incorporating two units into one. A large diaphragm to valve ratio provides precise regulation and high flow capacity.
P3RA102 is designed for applications that require high capacity and accurate process control. High precision pneumatic regulators are designed to provide a constant pressure output from a fluctuating supply pressure, much the same way an electronic pressure regulator works. Pressure regulators provide varying degrees of accuracy with regards to their reduced pressure output. General purpose regulators work for most fluid power applications. However, for more pressure critical applications, precision regulators can provide the control required.
Parker’s R119 Pilot Operated Regulators provide accurate pressure regulation and very quick response times. This heavy duty, rugged regulator will handle the most demanding industrial applications. This pilot operated regulator can be controlled by a remote or distant small pilot regulator and is ideal for maximum capacity requirements in applications where units are not readily accessible.